Ink cartridges come with ink sensors, installed on them in the form of Integrated-Circuit chips. These sensors send data related to the cartridge’s ink level to the connected computer. It signals the computer to alert you when its ink falls below the required level. It is necessary that you replace the cartridge correctly when it runs out of ink so that your printer’s quality is not compromised.
Top tips for replacement of ink cartridge:
- Determine the cartridge needing replacement
It can get frustrating when you have to print an important document instantly, but you find your cartridge has run out of ink. Thus, to avoid such a situation, you can check the control panel of your printer to understand which of the printer cartridges needs to be replaced. An on-time replacement with the help of the status monitor also protects the printer from any damage.
- Know when to remove a cartridge
Cartridges have built-in ink nozzles that help pass on the ink from cartridge to paper. Removing it much before you initiate the replacement will lead to a dried-up ink at the nozzle. It may obstruct with future printing. Thus, you should take care to leave the cartridge in the printer until when you initiate a replacement.
- Match the right cartridge with the printer
Ink cartridges come in different variations, suitable for different models. You must have a comprehensive knowledge of your printer model and the cartridge that fits it the best. It will ensure your printer functions at its optimum and gives out a high quality print of image and text for a long time. Once you are aware of the right cartridge that goes with it, you can look for different brands and sellers that offer one and purchase accordingly.
- Replacing is better than refilling
It is because refilling requires a certain degree of precision. Numerous DIY videos and suggestions may inspire you to work it out yourself. Nevertheless, refilling is risky as even minor mistakes can lead to compromising the printer’s quality and may damage its cartridge permanently.
Also, using original manufactured ink cartridges is much better for a long-lasting printer than recycling on your own.
- Keep the cartridge and ink nozzle covered
It is necessary to keep the cartridge and ink supply area covered. It is because the ink nozzle or the cartridge itself is prone to attracting dust due to the presence of liquid ink. Once dust or dirt accumulates there, it can get difficult to remove it and replace. It may also interfere with the printer’s quality.
- Take care while removing the cartridge
Removal of used printer cartridges while replacing them needs to be done with extra care. There should not be any leak of existing ink as it can get extremely messy if it spreads. Besides, printer ink also contains chemicals which can lead to skin irritation.
Apart from these, you also need to know which cartridges will go with your printer. The high-capacity ones can be a valuable replacement as they come with a cheaper per-page cost. You may also opt for cartridges that come in a combination of colours. So, choose carefully, and make sure you take care to use the above tips for an efficient cartridge replacement.